Harbor Freight Mini mill spring loaded lock pin: A modification to the HF mini mill that will prevent destroying the gears by accidentally leaving the locking pin in place when you start up the mill.  This mod requires nothing be done to the mill itself.  Simply attach the lock pin and you are done. - added 12/11/05

Harbor Freight Mini Lathe Tailstock Camlock: A highly recommended modification to the mini lathe.  The tailstock is so easy to use now!  no more trying to tighten the tailstock lock bolt in tight spots! - added 1/7/06

Scissor style knurling tool for QCTP:  A bump knurler simply puts too much strain on a lathe (especially when the lathe is as diminutive as a 7X10) and so I built this scissor style knurling tool from looking at other peoples knurling tools.  No plans as of right now, just pictures. 

Incense burner:  A fun 30 minute or less project for those of you who have a lathe and like the smell of incense.